2013 Honda Civic Wheel Bearing Parts

Si 2.4L L4 change vehicle

Showing 1 - 10 of 30 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2013 Honda Civic Wheel Bearing - Front NSK

2013 Honda Civic Wheel Bearing - Front NSK

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your service manual or check with your local dealer.

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Honda Civic	Front	Si

40 In Stock

$87.04 CAD

$104.45 CAD

Brand	NSK
Part #	NSK1941374
Condition	New
Warehouse	A

2013 Honda Civic Wheel Bearing - Front NTN

2013 Honda Civic Wheel Bearing - Front NTN

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Honda Civic	Front	Si

1 In Stock

$123.44 CAD

$148.13 CAD

Brand	NTN
Part #	NTN1824026
Condition	New
Warehouse	A

2013 Honda Civic Wheel Bearing - Front Transit Auto

Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
Transit Auto
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with multiple alloys for improved heat dissipation and performance
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included)

This Part Fits the Following OEM/Substitute Numbers:

120.40057, 121.40057, 126054, 248880060, 248880317, 31347, 31381, 48880060, 48880317, 510111, 748880060, 748880317, 7795, 7844, 901080, 914, 980060, 980317...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Honda Civic	Front	Si

Brand	Transit Auto
Part #	KBB-102792
Condition	New
Warehouse	E

2013 Honda Civic Wheel Bearing - Front and Rear Transit Auto

Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
Transit Auto
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with multiple alloys for improved heat dissipation and performance
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included) + 2x Rear Top Quality Dis

This Part Fits the Following OEM/Substitute Numbers:

120.40040, 120.40057, 121.40040, 121.40057, 126054, 248880060, 248880317, 248880402, 31347, 31381, 31420, 48880060, 48880317, 48880402, 510111, 512450, 537, 7256...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Honda Civic	Front and Rear	Si

Brand	Transit Auto
Part #	KBB-106783
Condition	New
Warehouse	E

2013 Honda Civic Wheel Bearing - Front and Rear Transit Auto

Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
Transit Auto
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Precision Drilled and Diamond Slotted to for maximum heat dissipation
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic Positive Plus Brake Pad Set (Hardware Include

This Part Fits the Following OEM/Substitute Numbers:

120.40040, 120.40057, 121.40040, 121.40057, 126054, 2164625, 2164634, 248880060, 248880317, 248880402, 31347, 31381, 31420, 48880060, 48880317, 48880402, 510111, 512450...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Honda Civic	Front and Rear	Si

Brand	Transit Auto
Part #	KBB-107374
Condition	New
Warehouse	E

2013 Honda Civic Wheel Bearing - Front and Rear Transit Auto

Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
Transit Auto
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G-Coating avoids corrosion
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Genius Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Coated Genius Disc

This Part Fits the Following OEM/Substitute Numbers:

120.40040, 120.40057, 121.40040, 121.40057, 126054, 248880060, 248880317, 248880402, 31347, 31381, 31420, 48880060, 48880317, 48880402, 510111, 512450, 537, 7256...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Honda Civic	Front and Rear	Si

Brand	Transit Auto
Part #	KBB-108540
Condition	New
Warehouse	E

2013 Honda Civic Wheel Bearing - Front and Rear Transit Auto

Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
Transit Auto
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G-Coating avoids corrosion
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Genius Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included) + 2x Rear Coated Genius

This Part Fits the Following OEM/Substitute Numbers:

120.40040, 120.40057, 121.40040, 121.40057, 126054, 248880060, 248880317, 248880402, 31347, 31381, 31420, 48880060, 48880317, 48880402, 510111, 512450, 537, 7256...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Honda Civic	Front and Rear	Si

Brand	Transit Auto
Part #	KBB-108197
Condition	New
Warehouse	E

2013 Honda Civic Wheel Bearing - Front and Rear Transit Auto

Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
Transit Auto
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Precision Drilled and Diamond Slotted to for maximum heat dissipation
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Coa

This Part Fits the Following OEM/Substitute Numbers:

120.40040, 120.40057, 121.40040, 121.40057, 126054, 2164625, 2164634, 248880060, 248880317, 248880402, 31347, 31381, 31420, 48880060, 48880317, 48880402, 510111, 512450...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Honda Civic	Front and Rear	Si

Brand	Transit Auto
Part #	KBB-107563
Condition	New
Warehouse	E

2013 Honda Civic Wheel Bearing - Front and Rear Transit Auto

Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
Transit Auto
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with multiple alloys for improved heat dissipation and performance
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Top Quality Disc Brak

This Part Fits the Following OEM/Substitute Numbers:

120.40040, 120.40057, 121.40040, 121.40057, 126054, 248880060, 248880317, 248880402, 31347, 31381, 31420, 48880060, 48880317, 48880402, 510111, 512450, 537, 7256...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Honda Civic	Front and Rear	Si

Brand	Transit Auto
Part #	KBB-107183
Condition	New
Warehouse	E

2013 Honda Civic Wheel Bearing - Front and Rear Transit Auto

Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
Transit Auto
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Precision Drilled and Diamond Slotted to for maximum heat dissipation
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included) + 2x Re

This Part Fits the Following OEM/Substitute Numbers:

120.40040, 120.40057, 121.40040, 121.40057, 126054, 2164625, 2164634, 248880060, 248880317, 248880402, 31347, 31381, 31420, 48880060, 48880317, 48880402, 510111, 512450...VIEW MORE

Additional Fitment Information: